St52 C45e E355 Stkm 13c Cold Drawn Seamless Carbon Steel Hydraulic Cylinder Tube

St52 C45e E355 Stkm 13c Cold Drawn Seamless Carbon Steel Hydraulic Cylinder Tube

Portion I: Product INTRODUCTION
1. Description: 
Honed tube is a kind of sleek bore metal tube used to manufacture hydraulic cylinder barrels that is the core part of a piece of hydraulic cylinder. 

2. Commodity: E355 Cold drawn hydraulic cylinder tube

three. Size range: 40mm*30mm-580mm*500mm

4. Available metal quality: 

SAE/AISI:  SAE1571, SAE1026, SAE1045, SAE4130, SAE4140
DIN:  ST52, ST52.3, ST52.4
EN:  E355, C45E, 25CrMo4, 42CrMo4, CK45, S45C, E410, E470
GB:  20#, forty five#, 16Mn, Q345B, Q345C, Q345D, Q345E, 25Mn, 27SiMn, 

5. Manufacture method: Chilly rolled, hydraulic cold drawn, sizzling rolled+deep gap dull

six. Shipping and delivery condition: 

BK BKW BKS GBK NBK Q+T
+C +LC +SR +A +N
Cold rolled Chilly drawn Pressure relieved Annealed Normalized Quenched+Tempered

seven. Bore remedy: Honing, skiving&roller burnishing

eight. Bore roughness handle: Ra0.25um max or Ra0, 35um max for honed tubes, Ra0.25um max for skived&roller burnished tubes. 

nine. End finish: Plain finishes with square cuts, cost-free of burrs for honed tubes. Minor bevelled finishes for skived&roller burnished tubes. 

10. CZPT export packing: In bundles tied with metal strips. Int&ext oil coating. Conclude plastic caps. External packing by PVC bags and knit baggage. 

eleven. CZPTized packing and marking can be presented upon request. 

12. H8 tolerance: 

ID assortment Tolerance ID range Tolerance
eighteen< d ≤30 +/+.033 180< d ≤250 +/+.072
thirty< d ≤50 +/+.039 250< d ≤300 +/+.081
fifty< d ≤80 +/+.046 three hundred< d ≤315 +/+.081
eighty< d ≤120 +/+.054 315< d ≤400 +/+.089
a hundred and twenty< d ≤180 +/+.063 four hundred< d ≤500 +/+.097

thirteen. Variation in between honed tube and skived&roller burnished tube: In hydraulic cylinder market, there are 2 solutions for bore treatment method: Honing, and skiving&roller burnishing. Honing or skiving&roller burnishing leads to different inside surface impression, but equally make sure good roughness. 

Inside Area Condition OF HONED TUBES:

Inner Floor Condition OF SKIVED&ROLLER BURNISHED TUBES:

Component II: Regularly Requested Questions
one. MOQ: 
CZPTly Min Purchase Amount can be two-3 tons/measurement for tubes with OD underneath 250mm, and ten tons/dimensions for tubes with OD previously mentioned 250mm. Often, it is dependent on metal grade you want. If you require specific quality like E410, E470 or alloy metal tube, MOQ must be 10 tons/size at minimum. 
2. Shipping and delivery Time: CZPTly, our delivery time for honed tubes is around 40-sixty days based on the measurements and portions. It will consider us 15-30 times to get uncooked material. For illustration, if you need 3 tons of small dimension honed tubes 50mm*40mm with roughness of Ra0.25um max, it will consider us at least thirty times to hone this size. 
3. Warranty&Ensure: Warranty&ensure period of time is 6 months considering that we produce the tubes, and we are not dependable for high quality dilemma induced by improper unloading or storage after cargo. We welcome customer’s inspection prior to cargo. 
4. Payment Technique: We take payment strategy like T/T, L/C, or D/P, but it depends on our investigation about customers. We have a solution to consider the credit score of buyers from all over the planet, and time and amount of D/P we can release is established by the evaluation. 
five. Quality Manage: 90% of the tubes are manufactured from hot rolled seamless pipes. So, quality of uncooked materials established top quality of concluded tubes. We purchase uncooked materials from steady suppliers who are foremost metal mills, and we inspect the uncooked materials as per the requirements. Throughout our creation method, there is inspection and good quality management in each phase. 

Part III: Firm INTRODUCTION
We are a manufacturer of chilly drawn, cold rolled, and hydraulic cold drawn steel tubes with OD upto 356mm because 2002. Covering an location of about 32000M2, we have twelve regular workshops with 2 hydraulic cold drawing benches, 4 chain chilly drawing benches, and 2 ERW mills. Our amenities covers all the production techniques from pickling, chilly drawing, warmth dealing with, observed slicing, straightening, inspection, packing to more machining &turning, chilly drawing die fabrication, and tools repairation&routine maintenance. 

Factory Look:

Uncooked Content Inventory:

HYDRAULIC Cold DRAWING:

STRAIGHTENING:

Cutting:

HONING:

DEEP Hole Dull/DRILLING:

SKIVING&ROLLER BURNISHING:

 

St52 C45e E355 Stkm 13c Cold Drawn Seamless Carbon Steel Hydraulic Cylinder Tube

TAGs:

Chain And Sprocket

As one of the chain and sprocket manufacturers, suppliers, and exporters of mechanical products, We offer chain and sprocket and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of chain and sprocket.

Recent Posts