China supplier Factory Manufacturing 415 415h 420 420h 428 428h Motorcycle Drive Chain for Dirt Bike

Product Description

Factory manufacturing 415 415H 420 420H 428 428H motorcycle drive chain for dirt bike

We also supply motorcycle chain 25, 25H, 06B, 415, 415H, 420, 420H, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, O ring and X ring chain and so on, our chains are both excellent in quality and reasonable in price

1.Good quality and reasonable price

2.Has taken measure to better antirust

3.Long-life duration and high strength

4.Pre-stretching and running for each motor chain before delivery

5.Riveting: Two sides riveting or 4 sides riveting

6.All parts are heat treatment (quenching and tempering) and controlled in a reasonable tolerance range

7.We can also produce as your sample or drawing

8.Packing: According to your demand to design

 

 Specifications are as follows:

Chain No.

Pitch

Roller diameter

Width between inner plates

Pin diameter

Pin length

Inner plate depth

Plate thickness

Ultimate tensile strength

Average tensile strength

Fatigue

p

d1 max

b1 min

Ld2 max

max

Lc max

h2 max

T1

Q min

Q0

amx

mm

mm

mm

mm

mm

mm

mm

mm

kn

kn

kgf

06B

9.525

6.35

5.72

3.28

13.2

14.2

8.2

1.3

9

10

 

415

12.7

7.75

4.88

3.96

12.5

13.9

10.4

1.3

11.6

12.5

380

415H

12.7

7.75

4.88

3.96

13.1

14.5

11.5

1.5

15.6

16.1

380

420

12.7

7.77

6.35

3.96

14.5

16.1

12

1.5

16

16.5

380

420H

12.7

7.77

6.35

3.96

15.7

17.4

12

1.8

17

17.5

380

428

12.7

8.51

7.75

4.45

16.5

18.05

12

1.6

17.8

18.5

380

428H

12.7

8.51

7.75

4.45

18.3

19.08

12

2.03

20.6

21.1

450

428HG

12.7

8.51

7.75

4.51

18.9

20.1

12.3

2

20.6

21.5

450

520

15.875

10.16

6.35

5.08

17.7

19

15

2

26.5

29.5

650

520H

15.875

10.16

6.35

5.24

18.9

20.5

15

2.42

30

31

700

525

15.875

10.16

7.94

5.08

18.8

20.5

15

2.03

26.6

29

650

525H

15.875

10.16

7.74

5.24

20.4

22.2

15

2.42

30

31

700

530

15.875

10.16

9.4

5.08

20.9

22.2

15

2

26.5

29.7

650

530H

15.875

10.16

9.4

5.08

21.9

24.2

15

2.42

30

31.5

700

630

19.05

11.91

9.4

5.94

22.2

24

18

2.4

35

37

800

HangZhou CHINAMFG Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

 Due to our CHINAMFG in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

 With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

 

Surface: Golden, Black, Blue, Grey
Surface Treatment: Zinc Plated, Sand Blasting, Dull Polish
Structure (for Chain): Motorcycle Chain
Process: Assemble
Module: 415 415h 420 420h 428 428h
Certification: ISO9001:2001
Customization:
Available

|

Customized Request

drive chain

How does the material hardness of a drive chain affect its durability?

The material hardness of a drive chain plays a significant role in determining its durability and resistance to wear. Here is a detailed explanation:

Material hardness refers to the ability of a material to resist indentation, abrasion, and penetration by external forces. In the context of drive chains, the hardness of the chain’s components, such as pins, bushings, and rollers, directly affects the chain’s durability and lifespan.

When it comes to drive chain durability, the following factors come into play:

  • Resistance to Wear: A higher material hardness typically results in better resistance to wear. Drive chains with harder materials can withstand the friction and contact forces encountered during operation, minimizing the wear on critical components. This translates to extended chain life and reduced maintenance requirements.
  • Impact Resistance: The material hardness of a drive chain also affects its ability to resist impact forces. Chains operating in environments with frequent impacts or shock loads, such as in mining or heavy-duty applications, require high hardness materials to withstand the sudden stresses without deformation or failure.
  • Resistance to Deformation: Harder materials exhibit greater resistance to deformation under load. This is particularly important in drive chains where precise interlocking of chain components is necessary for efficient power transmission. Chains with higher material hardness maintain their shape and dimensional integrity, ensuring consistent performance and minimizing the risk of chain elongation or misalignment.
  • Corrosion Resistance: While material hardness primarily affects wear resistance, it can indirectly impact the chain’s resistance to corrosion. Certain high-hardness materials, such as stainless steel or specific alloys, offer improved corrosion resistance compared to softer materials. This is especially relevant in applications where the chain is exposed to corrosive environments, such as marine or chemical industries.

It is important to note that while higher hardness generally leads to improved durability, excessive hardness can also result in brittleness and reduced impact resistance. Therefore, a balance must be struck between hardness and other mechanical properties to ensure optimal performance and durability of the drive chain.

Manufacturers typically specify the appropriate hardness level for drive chain components based on the specific application requirements. These specifications take into account factors such as load capacity, operating conditions, anticipated wear rates, and desired service life.

Regular maintenance practices, such as proper lubrication, periodic inspection, and tension adjustment, are essential for maximizing the durability and performance of the drive chain, regardless of its material hardness.

By selecting a drive chain with the appropriate material hardness and implementing proper maintenance practices, operators can ensure optimal durability, extended chain life, and reliable power transmission in various industrial applications.

drive chain

Can a drive chain be used in a power generation system?

Yes, a drive chain can be used in certain types of power generation systems as a method of power transmission. Here is a detailed explanation:

In power generation systems, the purpose is to convert a primary energy source into electrical power. While drive chains are not commonly used in large-scale power generation applications like turbines or generators, they can be employed in specific scenarios, such as:

  • Small-Scale Power Generation: In small-scale power generation systems, such as micro-hydropower or wind turbines, drive chains can be utilized to transmit rotational motion from the turbine or rotor to a generator. The chain connects the rotating components, ensuring efficient power transmission.
  • Linkage Mechanisms: Drive chains can be used in mechanical linkage mechanisms within power generation systems to transmit motion or force between various components. These mechanisms can be found in applications such as valve control systems, fuel feeders, or governor systems.
  • Ancillary Devices: Drive chains may also be employed in ancillary devices within power generation systems, such as tensioners, clutches, or braking mechanisms.

It’s important to note that the selection and application of drive chains in power generation systems require careful consideration of factors such as load, speed, torque, and environmental conditions. Additionally, regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in these applications.

While drive chains have their applications in power generation systems, it is essential to consult with experts or manufacturers to determine the most suitable and efficient power transmission method for a specific power generation setup.

drive chain

How often should a drive chain be lubricated?

Proper lubrication is essential for maintaining the performance and longevity of a drive chain. However, the frequency of lubrication depends on several factors, such as the application, operating conditions, and the type of lubricant used. Here are some general guidelines:

  • 1. Manufacturer’s Recommendations: Always refer to the manufacturer’s recommendations and guidelines for the specific drive chain you are using. They may provide specific instructions regarding lubrication frequency and the type of lubricant to use.
  • 2. Operating Conditions: Consider the operating conditions in which the drive chain operates. Factors such as temperature, humidity, dust, and exposure to contaminants can affect the lubrication requirements. In harsh or demanding conditions, more frequent lubrication may be necessary.
  • 3. Usage Intensity: The frequency of lubrication can also depend on the intensity of usage. Chains used in high-speed or heavy-duty applications may require more frequent lubrication to maintain optimal performance.
  • 4. Visual Inspection: Regularly inspect the drive chain for signs of inadequate lubrication, such as dryness, rust, or excessive wear. If you notice any of these signs, it may indicate the need for more frequent lubrication.
  • 5. Lubricant Type: The type of lubricant used can also affect the lubrication frequency. Some lubricants provide longer-lasting protection and require less frequent application, while others may need to be applied more regularly.

In general, it is recommended to lubricate a drive chain at least every few hundred miles or operating hours. However, it is crucial to follow the manufacturer’s recommendations and consider the specific operating conditions to determine the appropriate lubrication frequency for your drive chain.

China supplier Factory Manufacturing 415 415h 420 420h 428 428h Motorcycle Drive Chain for Dirt Bike  China supplier Factory Manufacturing 415 415h 420 420h 428 428h Motorcycle Drive Chain for Dirt Bike
editor by CX 2023-10-21

Chain And Sprocket

As one of the chain and sprocket manufacturers, suppliers, and exporters of mechanical products, We offer chain and sprocket and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of chain and sprocket.

Recent Posts